T238 V2.0 Bluetooth Mosfet Optical Sensor APP Control Programmable for Airsoft V3 Gearbox
T238 V2.0 Bluetooth Mosfet Optical Sensor APP Control Programmable for Airsoft V3 Gearbox
The DTU V2.0 for V3 bluetooth version gearbox is a multifunctional MOSFET switch which can be programmed by smart phone via bluetooth.Adopts a high speed processor, 8 optical sensors and 2 high power MOSFET chips.It is specially designed for AIRSOFT, Gel Ball Blaster and other V3 gearboxes with semi-automatic and fully automatic functions.
Features:
1.Supports up to 14.8V battery.
2.Bluetooth module.Integrated bluetooth wireless communication module, use smart phone to program through bluetooth, can download Android free APP.
3.Auto-loading functionis designed for gel ball blaster magazines with motor inside, when changing the magazine, the magazine motor will run automatically for 0.5 second. 4.PRE-COCKING.The default postition of the piston is adjustable is semi-auto model.Per-cocking function can be implementing,zero trigger delay.
5.ETU overheat protection.When the DTU is overheated,after the trigger is pulled,the motor will give a beep prompt until it is automatically restarted after cooling. 6.Low battery voltage protection：the default setting is 7.4V battery.Change the battery when hearing‘beep，beep，beep，beep’4 times low voltage warning sound.
7.Active braking.The energy that support the active brake function comes from the inertia of motor, stop the piston without delay. The effect of active brake is significant on high torque motor.
8.Fast speed of respond.This module is powered by small current，the current flow through the MOSFET directly to the motor，provide higher current to increase the rate of fire and speed of respond. 9.Block-up protection.When gearboxBlock-up occurs, the system stops working and emits an elongated 'beep' sound. Please check the wave box immediately by power off.
10.Multiple shooting modes.The system includes multiple shooting modes，those modes can be selected by fire select switch. 11.Gearbox protection.The active brake prevents the over-spin of gears,this solve the issue that single shot changes to multiple shot under high voltage.meanwhile,the spring is fully released in semi-auto model and parts in the gearbox are not under strain,increase the life cycle of your gearbox.
Modes:
-
Safe– This mode is completely the same as original safe mode. The trigger can be pulled but nothing happens. The default mode is safe, however this mode can be programmed to semi-auto, double stroke single shot, 3-round burst to 6-round burst.
-
Semi– The default mode is semi, however this mode can be programmed to semi-auto, double stroke single shot, 3-round burst to 6-round burst.
-
Auto– The default mode is full-auto, however this mode can be programmed to full-auto, 3-round burst, 6-round burst, or 9-round burst.
Package Content:
-
Digital trigger unit V2.0 X1
-
Manual X1
-
Warranty X1
-
Badge X1
-
Small bag accessories X1
-
Insulation sticker X1
Note:
-
This product requires soldering and wiring. It is recommended that installation is undertaken by an experienced technician.
Installation Guide for T238 V2.0 Bluetooth V3 ETU Mosfet with Optical Sensor and APP Control
Introduction: Upgrade your Airsoft experience with the T238 V2.0 Bluetooth V3 ETU Mosfet. This guide will walk you through the installation process for your Airsoft V3 Gearbox. Ensure you have the necessary tools and follow these steps for a successful setup.
Tools Needed:
- Phillips screwdriver
- Small flathead screwdriver
- Needle-nose pliers
- Wire cutter and stripper
- Soldering iron and solder (if required)
Safety Precautions:
- Always work in a well-lit, ventilated area.
- Ensure your Airsoft gun is unloaded and the battery is disconnected.
- Wear safety glasses to protect your eyes.
Step-by-Step Installation:
-
Disassemble Your Airsoft Gun:
- Carefully disassemble your Airsoft gun to access the V3 gearbox.
- Remove any components that may obstruct the installation of the ETU.
-
Remove Existing Trigger Assembly:
- Carefully detach the existing trigger assembly from your gearbox.
- Note the arrangement of the springs and contacts for reassembly, if needed.
-
Install the T238 ETU:
- Position the T238 V2.0 ETU in place of the old trigger assembly.
- Ensure the optical sensor is correctly aligned with the sector gear.
- Securely fasten the ETU using the provided screws or the existing ones.
-
Wiring Setup:
- Route the wires from the ETU to where the battery connects.
- If soldering is required, carefully solder the connections ensuring a solid bond.
- Use heat shrink tubing to insulate the soldered connections.
-
Reassemble Gearbox:
- Once the ETU is installed and wired, reassemble the gearbox.
- Ensure all gears and springs are correctly placed.
-
Connect to the APP:
- Download the corresponding APP for the T238 V2.0 ETU.
- Connect the ETU to your smartphone via Bluetooth.
- Follow the APP’s instructions to program your ETU settings.
-
Test Your Setup:
- Reassemble your Airsoft gun.
- Connect the battery and test the trigger response.
- Adjust settings using the APP as needed.
-
Troubleshooting:
- If you encounter issues, recheck all connections and the alignment of the optical sensor.
- Consult the T238 V2.0 user manual or contact customer support for further assistance.
Conclusion: Enjoy the enhanced performance of your Airsoft gun with the T238 V2.0 ETU. Customize your settings for an optimal gaming experience and immerse yourself in the action with precise control and reliability.
Tactical Specs:
- Package Includes
- Features
- Dimensions
- Performance
- Special Features
- 1x V2 ETU Mosfet
تعذر تحميل توفر الالتقاط
SKU:14:29#T238 Bluetooth V3
عرض التفاصيل الكاملة
We are committed to supplying only the best in high-performance GelBlasters for adult enthusiasts.
Product Warranty
- 30-Day Coverage: Enjoy a comprehensive 30-day warranty on all GelBlasters
- Exclusions Apply: Our warranty does not cover damage resulting from misuse, accidents, or unauthorized modifications
- Easy Claim Process: Should you encounter any issues, our hassle-free claim process is designed for quick resolutions
معلومات السلامة
Stock up on batteries:
-
PowerHub Pro 8x USB Charger
- ["Total Ports: 8"
- "2 Ports (5V/2.1A): Rapid Charge"
- "4 Ports (5V/1A): Balanced Charging"
- "2 Ports (5V/0.5A): Trickle Charging"
تخفيض السعرPowerHub Pro 8x USB Charger
سعر عادي £14.99سعر عاديسعر الوحدة ل£29.99سعر البيع £14.99تخفيض السعر -
B3 Mains Charger:
- ["Universal Compatibility"
- "Fast & Efficient Charging"
- "Intelligent LED Indicators"
- "Built-In Safety Features"
B3 Mains Charger:
سعر عادي £14.99سعر عاديسعر الوحدة ل -
USB 3.7V SM2 Battery Charger
- ["USB Input Compatibility"
- "5V Input Range (0.5 to 2A)"
- "3.7V Output at 500mA"
- "Compact and Portable"
USB 3.7V SM2 Battery Charger
سعر عادي £4.99سعر عاديسعر الوحدة ل -
7.4v 3P Li-ion usb battery charger
- ["Compatibility: Specifically designed for 7.4V 3P Li-ion batteries
- ensuring a perfect fit and reliable charging."
- "Safety First: Protects against overcharging
- over-discharging
7.4v 3P Li-ion usb battery charger
سعر عادي £4.99سعر عاديسعر الوحدة ل
